Numerical Investigations of Polyester Coextrusion Instabilities - Mines Paris Accéder directement au contenu
Article Dans Une Revue Journal of Non-Newtonian Fluid Mechanics Année : 2013

Numerical Investigations of Polyester Coextrusion Instabilities


Interfacial instabilities occurring in the coextrusion process of molten polymers have been widely studied. The theoretical work based on the stability of 2D Poiseuille multilayer flows (invariant along the flow motion) have pointed out the convective nature of this instability (it is either amplified or damped in the flow direction). This behaviour has been confirmed by experimental observations. As this instability is purely elastic (the Reynold number in coextrusion process is very small), it is necessary to introduce a viscoelastic constitutive equation for the polymers. Comparisons between experimental observations and theoretical approaches based on the Giesekus or White-Metzner models give good agreements for laboratory simple devices. However, the applicability of this approach for industrial coextrusion process remains an important challenge, because one has to deal with the influence of complex geometries, varying temperature and more realistic constitutive equations. As it is still very costly in computational time to perform 3D instationary computations for viscoelastic fluids, a methodology to analyse the appearance of interfacial instabilities in a complex geometry is proposed within this paper. First, a stationary 3D computation is performed in the real geometry for a single polymer. This computation allows to find zones in which the flow motion is essentially 2D, isotherm and with maximum values of the shear rate and, thus, the Weissenberg number. Instationary 2D finite element computations for two layer flows and a multi-mode differential viscoelastic model are then performed in these zones. Spatio-temporal analyses give information on the spatial behaviour of interfacial disturbances. This methodology is applied to the coextrusion of two polyesters for which experimental observations are available. The simulations predict well the experimental results and show that the outlet zone can amplify low frequencies perturbations. Finally, the influence of processing parameters (temperatures, flow rates, ...) and die geometries has been checked.


Fichier principal
Vignette du fichier
JNNFM-2012.pdf (1.07 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00785075 , version 1 (07-02-2013)



Omar Mahdaoui, Patrice Laure, Jean-François Agassant. Numerical Investigations of Polyester Coextrusion Instabilities. Journal of Non-Newtonian Fluid Mechanics, 2013, 195, pp.67-76. ⟨10.1016/j.jnnfm.2012.12.014⟩. ⟨hal-00785075⟩
414 Consultations
540 Téléchargements



Gmail Facebook X LinkedIn More