A 3D study of the influence of friction on the Adiabatic Shear Band formation during High Speed Machining - Mines Paris Accéder directement au contenu
Communication Dans Un Congrès International Journal of Material Forming Année : 2008

A 3D study of the influence of friction on the Adiabatic Shear Band formation during High Speed Machining

Résumé

Adiabatic Shear Band (ASB) may form at very high speeds with materials having poor thermal conductivity. It results from the competition between plastic hardening and strain softening and initiates when the latter becomes predominant. Because of high speeds, the heat created does not have sufficient time to propagate, leading to the formation of high strain localized zones. Starting from a previous description of the ASB formation process where the friction phenomenon has been considered as negligible, the aim of this paper is to describe the influence of the latter on the ASB formation process. Consequently, using a very general 3D finite element code where mesh adaptation is triggered by an error estimator within an Arbitrary Lagrangian Eulerian formulation, the formation of several ASB has been simulated in 3D High Speed Machining taking friction into account. The results obtained allow proposing a description of its influence on both the ASB build up process and the final chip geometry.

Domaines

Matériaux
Fichier principal
Vignette du fichier
esaform2008_fourment1.pdf (271.49 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00510339 , version 1 (18-08-2010)

Identifiants

Citer

Lionel Fourment, Fabien Delalondre. A 3D study of the influence of friction on the Adiabatic Shear Band formation during High Speed Machining. 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 1415-1418, ⟨10.1007/s12289-008-0101-5⟩. ⟨hal-00510339⟩
56 Consultations
331 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More