Improved printability and electrical conductivity of carbon black polymer composite with a customized nozzle of material extrusion process - Mines Paris Accéder directement au contenu
Article Dans Une Revue Additive Manufacturing Année : 2024

Improved printability and electrical conductivity of carbon black polymer composite with a customized nozzle of material extrusion process

S. Marion
  • Fonction : Auteur
SMS
T. Joffre

Résumé

Due to the interactions between the fillers, the polymer and the die, the printing of filled polymer composites using the material extrusion process is challenging. Numerical computations have been carried out to investigate the fluid dynamics and heat transfer within the hot end of the material extrusion process. Firstly, a standard nozzle equipping the majority of 3D printers is considered. However, it is not possible to print an object on a commercial printer with a composite made of polylactic acid with 20 wt% of carbon black due to clogging issues. This impossibility is supported by the application of the Q-criterion, which is an indicator of flow kinematics. As a result, a novel nozzle design is proposed. The printing of the same object on the same printer equipped with the new nozzle succeeds. The electrical properties of walls printed with both the standard and the new nozzles are evaluated. The conductivity of a wall printed with the new nozzle is 42 % higher than that of a wall printed with the standard nozzle. Furthermore, complementary analysis using scanning electron microscopy shows that the porosity of the walls printed with the new nozzle is reduced which is a promising improvement.
Fichier principal
Vignette du fichier
Marionetal2023B_v3.pdf (6.95 Mo) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-04363364 , version 1 (24-12-2023)

Licence

Paternité - Pas d'utilisation commerciale - Pas de modification

Identifiants

Citer

S. Marion, T. Joffre, Julien Jaxel, Franck Pigeonneau. Improved printability and electrical conductivity of carbon black polymer composite with a customized nozzle of material extrusion process. Additive Manufacturing, 2024, 79, pp.103939. ⟨10.1016/j.addma.2023.103939⟩. ⟨hal-04363364⟩
39 Consultations
21 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More