Gravity-driven thinning of a high viscous liquid and interface deformation as a bubble reaches a free surface - Mines Paris Accéder directement au contenu
Communication Dans Un Congrès Année : 2015

Gravity-driven thinning of a high viscous liquid and interface deformation as a bubble reaches a free surface

Franck Pigeonneau


The gravity-driven migration of bubbles toward a free surface in a high viscous liquid occurs particularly in the glass industry. Indeed in a such process, raw materials are heated in order to react and create a molten glass. The chemical processes lead to a release of large amount of bubbles which further have to be removed to obtain a final product without defects. Since the bubble removal is mainly achieved by the buoyancy effect, the understanding of the bubble interaction with a free surface is an important issue to determine the onset of foaming. In this presentation, we summarize experimental results achieved in molten glasses at high temperature and in oils at room temperature. Experiments have been mainly focused in a thinning rate of liquid film using an interferometry method to determine the dynamics of the liquid film thickness. As a bubble approach a free surface, the interface deformations are driven by a balance between buoyancy and capillary forces meaning that the relevant dimensionless number is the Bond number. The experimental results show that the thickness of the liquid film at the top of the bubble decreases exponentially with time. This important result is the consequence of the mobility of fluid interface. Indeed for shear-free interface, the velocity in the thin liquid film is in first approximation uniform over the film thickness meaning that the flow is purely extensional. Whatever the fluid employed in the experiments, we establish a strong influence of the interface deformation measured by the Bond number. The smaller the Bond number is, the larger the thinning rate is. In other words, the film rupture occurs earlier when the Bond number is small (small bubble compared to the capillary length). We develop also a numerical method to simulate this problem established in the framework of Stokes flow since the typical Reynolds number in this particular problem is obviously much lesser than one. The problem has been solved using a boundary-integral formulation in two dimensions axisymmetric configuration. When the bubble is stuck close to the free surface, its shape is compared to the static form established previously by Princen. The exponential decrease is also found numerically and the thinning rate obeys the same behavior observed experimentally. In this presentation, we also present the recent results obtained with the boundary element method for a bubble and a free surface having uniform but unequal surface tensions. This situation is motivated by the fact that in application the surface tension can vary as a function of the gas nature. Here, the problem is driven by two parameters: the Bond number based on the surface tension of the bubble interface and the ratio of the two surface tensions. The numerical results show that the deformation of interfaces is more important when the Bond number is large and when the surface tension ratio is smaller than one. The bubble shape obtained at long times is compared to the static form established by Princen and Mason. The deformation of interfaces are strongly correlated to the thinning rate which is more and more important when the surface tension ratio is larger than one. Assuming a pure extensional flow in the liquid film when the bubble is stuck at the free surface, we point out that the thinning rate is inversely proportional to the area of the spherical cap created at the top of bubble. Using an asymptotic result provided by Princen and Mason, we find that the thinning rate is controlled by a unique parameter given corresponding to the harmonic average of the two Bond numbers based on the two surface tensions of interfaces.
Fichier principal
Vignette du fichier
absIUTAMBubblyFlows.pdf (100.66 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01519387 , version 1 (07-05-2017)


  • HAL Id : hal-01519387 , version 1


Franck Pigeonneau. Gravity-driven thinning of a high viscous liquid and interface deformation as a bubble reaches a free surface. IUTAM, Symposium on Bubbly Flows, Mar 2015, Oaxaca, Mexico. ⟨hal-01519387⟩
127 Consultations
70 Téléchargements


Gmail Facebook Twitter LinkedIn More