Article Dans Une Revue Journal of Fuel and Lubricants Année : 2015

Numerical Treatments of Slipping/No-Slip Zones in Cold Rolling of Thin Sheets with Heavy Roll Deformation

Résumé

In the thin sheet cold rolling manufacturing process, a major issue is roll elastic deformation and its impact on roll load, torque and contact stresses. As in many systems implying mechanical contact under high loading, a central part is under “sticking friction” (no slip) while both extremities do slip to accommodate the material acceleration of the rolled metal sheet. This is a crucial point for modeling of such rolling processes and the numerical treatment of contact and friction (“regularized” or not), of the transition between these zones, does have an impact on the results. Two ways to deal with it are compared (regularization of the stick/slip transition, direct imposition of a no-slip condition) and recommendations are given.

Fichier principal
Vignette du fichier
Lubricants-03-00113.pdf (909.14 Ko) Télécharger le fichier
Origine Fichiers éditeurs autorisés sur une archive ouverte
Licence
Loading...

Dates et versions

hal-01247908 , version 1 (23-12-2015)

Licence

Identifiants

Citer

Yukio Shigaki, Rebecca Nakhoul, Pierre Montmitonnet. Numerical Treatments of Slipping/No-Slip Zones in Cold Rolling of Thin Sheets with Heavy Roll Deformation. Journal of Fuel and Lubricants, 2015, 3 (2), pp.113-131. ⟨10.3390/lubricants3020113⟩. ⟨hal-01247908⟩
342 Consultations
752 Téléchargements

Altmetric

Partager

  • More