Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure - Mines Paris Accéder directement au contenu
Article Dans Une Revue Polymer Engineering and Science Année : 2015

Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure

Résumé

A complete experimental analysis of the microcellular injection process using Chemical Blowing Agents (CBA) with Gas Counter Pressure (GCP) and core-back expansion is presented. Three different types of polypropylene, neat and charged, were mixed with two different CBAs and injected into a plate mold with varying process parameters. First, an exhaustive cartographical mapping of the plate morphology is analyzed. In a second step, the relation between injection parameters and the resulting morphology is investigated. The results show that injection time affects the cellular structure. The formulation, especially the type of chemical foaming agent, controls the average bubble radius. Compared with classical injection process, the use of CBAs, combined to Gas Counter Pressure and core-back process, allows obtaining parts with good surface aspect, more homogeneous cellular structures and smaller bubble radius
Fichier principal
Vignette du fichier
Ruiz-morphological-analysis-PES2015.pdf (1.23 Mo) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-01182895 , version 1 (16-10-2015)

Identifiants

Citer

José Antonio Reglero Ruiz, Michel Vincent, Jean-François Agassant, Aurore Claverie, Sébastien Huck. Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure. Polymer Engineering and Science, 2015, 55 (11), pp.2465-2473. ⟨10.1002/pen.24136⟩. ⟨hal-01182895⟩
160 Consultations
803 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More