On the mechanical behaviour of AA 7075-T6 during cyclic loading - Mines Paris Accéder directement au contenu
Article Dans Une Revue International Journal of Fatigue Année : 2003

On the mechanical behaviour of AA 7075-T6 during cyclic loading


The mechanical behavior of an aluminum alloy during uniaxial cyclic loading is examined using finite element simulations of aggregates with individually resolved crystals. The aggregates consist of face centered cubic (FCC) crystals with initial orientations assigned by sampling the orientation distribution function (ODF) determined from the measured crystallographic texture. The simulations show that the (elastic) lattice strains within the crystals evolve as the number of cycles increases. This evolution is attributed to the interactions between grains driven by the local plasticity. Under constant amplitude strain cycles, the average (macroscopic) stress decays with increasing number of cycles in concert with the evolution of the lattice strains. Further, the average number of active slip systems also decreases with increasing cycles, eventually reaching zero as the material response becomes totally elastic at the grain level. During much of the cyclic history only a single slip system is activated in most grains. The simulation results are compared to experimental data for the macroscopic stress and for lattice strains in the unloaded state after 1, 30 and 1000 cycles.

Dates et versions

hal-00678714 , version 1 (13-03-2012)



Halit. S Turkmen, Roland E. Logé, P.R. Dawson, M.P. Miller. On the mechanical behaviour of AA 7075-T6 during cyclic loading. International Journal of Fatigue, 2003, 25 (4), pp.Pages 267-281. ⟨10.1016/S0142-1123(02)00149-4⟩. ⟨hal-00678714⟩
69 Consultations
0 Téléchargements



Gmail Facebook X LinkedIn More