Laser-induced damage in cold-sprayed composite coatings - Mines Paris Accéder directement au contenu
Article Dans Une Revue Surface and Coatings Technology Année : 2011

Laser-induced damage in cold-sprayed composite coatings


Ag-Ni composite coatings were achieved using the cold spray process. In this work, two blends were sprayed to lead to coatings with different mechanical properties, which corresponded to either a fine or a coarse microstructure. These coatings were studied using SEM and X-ray microtomography (XMT) to determine the best coating quality through characterization of particle-to-particle bonding. The fine microstructure showed better properties than the coarse microstructure. To avoid time-consuming characterization techniques such as SEM and XMT, an innovative laser characterization test was developed. The principle of this test is based on the thermal shock-induced by a laser pulse at the surface of the coating. Thus, particle interfaces were stressed and cracking damage could occur. SEM observation of cross-sections and top views was carried out to rank the coatings as a function of the generated damage. The influence of heat treatments was also studied. To enhance the approach, thermomechanical simulations have been performed on a real meshed microstructure. The influence of layering effect in the cold spray was shown to be detrimental due to local concentrated stresses.



Dates et versions

hal-00619392 , version 1 (06-09-2011)



Gilles Rolland, Pierre Sallamand, Vincent Guipont, Michel Jeandin, Elodie Boller, et al.. Laser-induced damage in cold-sprayed composite coatings. Surface and Coatings Technology, 2011, 205, pp.4915-4927. ⟨10.1016/j.surfcoat.2011.04.103⟩. ⟨hal-00619392⟩
127 Consultations
0 Téléchargements



Gmail Facebook Twitter LinkedIn More