Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation - Mines Paris Accéder directement au contenu
Article Dans Une Revue Journal of Non-Crystalline Solids Année : 2004

Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation

Résumé

Previous work has demonstrated the feasibility of synthesizing low-density polyurethane- and polyisocyanurate-based aerogels that exhibit low effective thermal conductivity. On the basis of this literature, the present study synthesized and characterized nanostructured polyurethane aerogel-like materials processed via subcritical drying routes. Two families of polyurethane gels were studied. Wet gels were synthesized with two polyols of different functionality. The influence of the composition of the reaction media is discussed. Depending on the solubility of the precursors, macroporous foam-like or mesoporous aerogel-like materials can be obtained as observed by scanning electron microscopy coupled with mercury porosimetry. Prior to drying, specific washing steps were performed. Preliminary results obtained by evaporative and freeze-drying were then compared to reference aerogel materials dried through a direct supercritical route. Only a slight density increase was observed. Effective thermal conductivities were also measured and discussed.

Dates et versions

hal-00531336 , version 1 (02-11-2010)

Identifiants

Citer

Arnaud Rigacci, J.C. Maréchal, Monique Repoux, Maryline Moreno, Patrick Achard. Preparation of polyurethane-based aerogels and xerogels for thermal superinsulation. Journal of Non-Crystalline Solids, 2004, 350, pp.Pages 372-378. ⟨10.1016/j.jnoncrysol.2004.06.049⟩. ⟨hal-00531336⟩
182 Consultations
0 Téléchargements

Altmetric

Partager

Gmail Facebook Twitter LinkedIn More