3D Computation of reactive moulding processes - Mines Paris Accéder directement au contenu
Communication Dans Un Congrès International Journal of Material Forming Année : 2008

3D Computation of reactive moulding processes


Electrical equipment for medium and high voltage is manufactured using reactive moulding process. During mould filling, air bubbles or weld-lines can appear which may be a huge problem for electrical insulation devices. Moreover, the use of thermoset materials induces delamination due to the resin's shrinkage. Product development delays can be reduced using numerical tools to simulate part forming process. In this paper, we present a three dimensional finite element analysis of the filling and curing stages of reactive moulding process. During the first stage, flow computation takes into account heat transfer and the curing reaction according to appropriate models. In the curing phase, the evolution of the degree of cure is coupled with an evolution model of the glass transition temperature. Taking in account his coupling phenomenon permits the computation of a more realistic curing kinetic and modelling of the slowdown at vitrification. The thermal field prediction is then more accurate. To validate this approach, experiments were performed. A comparison with computational results shows a good agreement in filling and temperature evolution inside the cavity.


Fichier principal
Vignette du fichier
esaform2008_foudrinier.pdf (364.91 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-00510337 , version 1 (18-08-2010)



Emmanuel Foudrinier, Cécile Venet, Luisa Silva. 3D Computation of reactive moulding processes. 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 735-738, ⟨10.1007/s12289-008-0280-0⟩. ⟨hal-00510337⟩
89 Consultations
420 Téléchargements



Gmail Facebook X LinkedIn More