Thermo-mechanical analysis of GaAs devices under temperature-humidity-bias testing - Mines Paris Accéder directement au contenu
Communication Dans Un Congrès Année : 2015

Thermo-mechanical analysis of GaAs devices under temperature-humidity-bias testing


Accelerated life tests on microelectronic devices are needed to estimate their degradation under severe environment. THB (Temperature Humidity Bias) [1] at 85°C and 85%RH (relative humidity) is commonly used for reliability studies. Empirical acceleration laws, used for THB test take into account the temperature change (from 22°C to 85°C), but they do not quantify its impact of the corresponding thermo-elastic stress which it adds to the residual stress in the die and of possible microstructure changes. The aim of this work is to determine the thermo-mechanical stresses induced in the active layer of a Gallium Arsenide (GaAs) chip by the THB test. They are due to the mismatch in Coefficients of Thermal Expansion (CTE) between the stack of thin film materials used as metallurgic interconnection and the intermediate dielectric layers above the active area of the chip. To estimate this stress, fist layers thicknesses measurement have been made with various techniques; second few configurations have been used to simulate heating and finally " complete " 2D Finite Element Analysis (FEA) has been performed. Elastic and thermo-physical materials data come from the literature. The results indicate compression of metal gate (Ti/Al/Au) and tensile stress concentration in the SiNx passivation layer. The outcomes is compared with THB test results from [2] and suggests that stress induced by heating must be considered to explain failure during THB test.


Fichier principal
Vignette du fichier
Article-Kokou-079.pdf (903.62 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-01247921 , version 1 (23-12-2015)



Kokou Adokanou, Karim Inal, Pierre Montmitonnet, Frédéric Courtade, Barbara Bonnet. Thermo-mechanical analysis of GaAs devices under temperature-humidity-bias testing. 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems - EuroSimE 2015, Apr 2015, Budapest, Hungary. 8 p. - ISBN 978-1-4799-9949-1 ⟨10.1109/EuroSimE.2015.7103140⟩. ⟨hal-01247921⟩
206 Consultations
547 Téléchargements



Gmail Facebook X LinkedIn More