Effect of recrystallization on tensile behavior, texture, and anisotropy of Ti-3Al-2.5 V cold pilgered tubes - Mines Paris Accéder directement au contenu
Article Dans Une Revue Advanced Engineering Materials Année : 2011

Effect of recrystallization on tensile behavior, texture, and anisotropy of Ti-3Al-2.5 V cold pilgered tubes

Résumé

The recrystallized volume fraction of Ti 3Al 2.5aˆV seamless tubes is measured using electron BackScatter diffraction (EBSD) after annealing under various conditions. Standard tensile tests and contractile strain ratio (CSR) measurements are carried out in order to analyze the effect of recrystallization on the tensile behavior and the anisotropy of the tubes. The tensile tests show anomalous yield-point phenomena, which become stronger when the recrystallized fraction is increased. CSR value changes through recrystallization, from 0.8 in the cold worked stress relieved (CWSR) state to 1.1 in the fully recrystallized structure. Orientation distribution functions (ODFs) calculated from X-ray data reveal a decay in the intensity of the crystallographic texture as recrystallization advances. This can explain the tendency toward isotropy when complete recrystallization is achieved
Fichier principal
Vignette du fichier
Effect of Recrystallization on Tensile Behavior, Texture and Anisotropy of Ti-3Al-2.5V Cold Pilgered Tubes.pdf (604.38 Ko) Télécharger le fichier
Origine Fichiers produits par l'(les) auteur(s)
Loading...

Dates et versions

hal-00595335 , version 1 (30-05-2018)

Identifiants

Citer

Nicolás Bayona-Carrillo, Nathalie Bozzolo, Jean-Jacques Fundenberger, Bertrand Thomas, Patrick Camelin, et al.. Effect of recrystallization on tensile behavior, texture, and anisotropy of Ti-3Al-2.5 V cold pilgered tubes. Advanced Engineering Materials, 2011, 13 (5), pp.383-387. ⟨10.1002/adem.201000328⟩. ⟨hal-00595335⟩
318 Consultations
250 Téléchargements

Altmetric

Partager

Gmail Mastodon Facebook X LinkedIn More